You may login with either your assigned username or your e-mail address.
The password field is case sensitive.

Need suggestion on the issue of interrupted water supply from borewell

Hi,

We have 8 months old borewell, 320ft deep and have installed a new Taro Texmo 2 HP pump. We are using this borewell for 1 hr everyday (Morning 1/2 hr and Evening 1/2 hr). We were getting sufficient water and Amps was b/w 12 to 14 while running the motor with the voltage 210-220. From a month, I observe that when I start the borewell it runs for 5 to 15 mins gives same quantity of water after that amps falls to less than 10 and flow of water stops. After 5 mins if I restart the pump water flows for 5-10 mins and stops and if I try again some times it gives sufficient water and runs for more than 2 hrs.

1) Is our borewell got Dry.

2) Is there an issue with the pump/panel board/power

Please suggest

Name of Author: 
Pramod KB
Tags:

Post new comment

The content of this field is kept private and will not be shown publicly.
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
2 + 5 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 2.5 India License.