You may login with either your assigned username or your e-mail address.
The password field is case sensitive.

Reply to comment

1. Request immediate suggestion regarding borewell in Bangalore

I request an immediate comment/advice. We have recently drilled a bore well in Bangalore and have installed a Kirloskar 3 HP submersible pump at a depth of 330ft. Water is assessed at 2.5". For the first 24 hours, the water release was good, but then all of a sudden it stopped.

On investigation it was noted that the cable connected with the pipe, which had a slag at the surface end became very tight indicating that it had been pulled down. Perhaps the pump seems to have slipped out of its installed point and thus dragging the electric cable and thus making it tight at the surface.

The Panel indicates current, but there are no signs of motor running/ water coming out. We are in a bad situation. Please help/advise.

Arun Malhotra, 09972366712
HAL Airport Road, Bangalore

Reply

The content of this field is kept private and will not be shown publicly.
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
1 + 7 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 2.5 India License.