You may login with either your assigned username or your e-mail address.
The password field is case sensitive.

Reply to comment

1. Rubber Lining for RWH tanks

Dear Chetan,

Why are you thinking of rubber for making RWH tanks? It is normal practice to make tanks and then line them internally with rubber.This is an old method and I would not recommend it.You can get the Indian Standards for rubber lining which is IS 4682,you will find the rubber composition for this duty.

The best thing to do is to use HDPE tanks which are widely used for storing water.Rubber by itself can not be used for making tanks,it is best to use it for lining a tank.The cost of rubber has been going up steadily and you will find it quite expensive,probably any where up to Rs.20/- or more per litre storage volume compared to Rs.5/- or slightly more per litre of storage volume for HDPE. 




The content of this field is kept private and will not be shown publicly.
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
1 + 3 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 2.5 India License.